Water Hardness Test Strip
products
Speciality Test Strips
- Easy to use test strip
- Results instantly or in less than 15 seconds
- Detects less than 4 ppm or 0.2 grain/gal.
- Quantitation range: 0 4 8 17 30 50 100 200 300 ppm
- Measures calcium and magnesium as total hardness
Measure total hardness from 300 down to less than 4 ppm, or from 18 down to less than 0.2 grain/gal. Dual sensitivity scales make the reading of color blocks easy.
Package :
100strips/bot
Shelf life :
24 months from manufactured date (use within 3 months after opening the bottle)
The Ultimate Test Strip for 0.1 ppm Low Level Chlorine / Chloramine Test Strip
- Easy to use strip test
- Result in 30 Seconds
- Detects chlorine/chloramine less than 0.1 ppm
- Quantitative test results
- Color blocks 0 0.1 0.5 1.0 ppm
0.1 p pm Chloramine/Chlorine test strip for monitoring carbon tank chlorine leaks. The strip is optimized for Maximal reaction with chloramine to assure detection of trace amount of chloramine in the treated water. The strip reacts with both free chlorine and chloramine. Results are ppm total chlorine. The test is a 30 second test.
AAMI now allows the use of a dip-and-read test strip for monitoring of 0.1 ppm total chlorine (chlorine/chloramine) in dialysis water treatment
Package :
100strips/bot
Shelf life :
24 months from manufactured date (use within 3 months after opening the bottle)
The Most Versatile Chlorine / Bleach Test Strip
- Easy to use strip test
- Residual and potency test in one
- Detection sensitivity about 0.1 ppm
- Quantitation range 0 0.5 1.0 up to 500 and 500 ppm
- Residual and potency test, all in one step. 0 0.5 1.0 ppm chlorine, 1% bleach
WaterCheck™ RC strip will not react with peroxide. Therefore, it can be used in the reuse room in the presence of peroxide fume in the air.
Package :
100strips/bot
Shelf life :
24 months from manufactured date (use within 3 months after opening the bottle)
The Only Quantitative Peracitic Acid Test Strip
- Dip-and-read test strip
- Takes only 30 seconds
- Measures peracetic acid from 250 - 5000 ppm without dilution
- Quantitative test results
It is a quantitative test strip, rather than a Positive/Negative qualitative indicator strip. Dip-and-read in less than 30 seconds. No dilution required. The strip is best used for confirmation of required sterilant potency, quality assurance of accurate solution preparation or precise dosing of peracetic acid during disinfection of RO water purification system.
Package :
100strips/bot
Shelf life :
24 months from manufactured date (use within 3 months after opening the bottle)
Residual Peroxide Test Strip
- Stable at room temperature
- No refrigeration required
- Detection range: 0 - 100 ppm
- Color blocks 0 0.5 1.0 3.0 10.0 ppm
Test for the absence of residual peroxide. Stable at room temperature.
No refrigeration required.
Package :
100strips/bot
Shelf life :
24 months from manufactured date (use within 3 months after opening the bottle)
