products

Peracetic acid based. For endoscopes & medical instruments. Efficacy ∙ Effectiveness - Sterilization and high level disinfection of medical devices Components - Peracetic acid 0.13% + Hydrogen peroxide

Appearance :

• Base

  Colorless liquid with acetic acid odor in a white plastic container - Pale orange liquid with acetic acid odor in a white plastic container

• Additive

  Colorless or light yellow transparent liquid with alcohol odor in a polyethylene pack

How to Use SCOTERIN® Solution :

• 1. Mix the Base (4L) and Additive (90ml)
• 2. Wet the pre-cleaned medical devices thoroughly with the prepared disinfectant solution. (Soak devices and machines with fine holes or complicated structures with thoroughly prepared disinfectant using pressing injection or absorption. If necessary, use after leak testing.)
• 3. Wet thoroughly for more than 5 minutes (more than 10 minutes for spore sterilization).
• 4. Rinse for more than 15 seconds in the running sterile purified water after thoroughly soaking. (Depending on the purpose of use, excess amount water can be used. In the case of devices with fine holes or complicated structures, inject sterile purified water or water with pressure or spend more time rinsing to thoroughly wash as disinfection solution can remain inside. * Before disinfecting please check that the PAA concentration is 500 ppm or more on the test strip.

Storage :
Sealed container, Room temperature (1-30°C)

Package :
(Base 4L + Additive 90mL) x 2EA / Box

Shelf life :
18 months after manufacture date (in original, sealed package)